Biotech Lab / Microbiology Lab

                

 

1

AUTOCLAVE (VERTICAL)

The vertical steam sterilizer is used for sterilizing the loaded

material under steam pressure of 15 to 20 PSI. double walled

construction, inner body made of heavy gauge stainless steel

304 quality sheet, duly argon arc welded. The lid and ring are

made of stainless steel plate. The lide is fitted with pressure

gauge, safety valve (adjustable spring loaded) and steam exhaust

valve, provided safety valve is set to blow of at 15 PSI. A silicon

rubber gasket is fitted in the ring to ensure stem tight joint of the

lid. Outer body made with choice of S.S. sheet or M.S. sheet

powder coated. Foot operated lifting mechanism for lid opening.

Electrically operated, ISI quality immersion type heaters are used

for heating. The Autoclave is supported with three sturdy legs

duly painted, supplied with cord and plug.

 

 

Optional Accessories

1.  Digital temp: controller cum indicator

2.  Digital timer with indicator.

3.  Auto pressure cut off system.

4.  Automatic water level cut off system.

5.  Water level indicator with glass tube.

Size MM dia x height                    Rating             Capacity

250 x 450 mm                          1.5 K.W.               23 Litre.

300 x 500 mm                          2.0 K.W.               35 Litre.

350 x 550 mm                          3.0 K.W.               54 Litre.

400 x 600 mm                          3.5 K.W.               78 Litre.

450 x 600 mm                          4.0 K.W.               98 Litre.

550 x 750 mm                          6.0 K.W.              184 Litre.

 

BOD Incubator (Cooling Incubator)


Most versatile cabinet for Biochemical Oxygen Demand determinations.
Caster wheel mounted cabinet is double walled,outer body made of GI sheet,
properly powder coated and inside chamber made with choice of Aluminium
or Stainless steel sheet. The gap between the inner and outer wall is filled
with thermal glass wool insulation. Triple walled back side of the unit is provided
with an air circulation fan, the air circulation system consists of a TEFC
branded motor with long shaft and ball bearings coupled with dynamically
balanced impeller type blower to get powerful air circulation in the chamber
and ensures even temp: in the cabinet. Provided full view perspex door inside,
which makes it possible to inspect the specimens without disturbing the cabin
temperature. Supplied with shelvesa and adjustable shelf position. Equipped
with C.F.C. free compressor and refrigerant. Temp: Range 5⁰C to 60⁰C,
controlled by digital display temp: indicator cum controller with built in on
delay, Accuracy+/- 0.5⁰C,

 

 

Suitable to work in 220 V AC supply

Capacity Temp. Range


85 Litre 5⁰C to 60⁰C (Chamber Aluminium)
170 Litre 5⁰C to 60⁰C (Chamber Aluminium)
280 Litre 5⁰C to 60⁰C (Chamber Aluminium)
340 Litre 5⁰C to 60⁰C (Chamber Aluminium)
85 Litre 5⁰C to 60⁰C (Chamber Stainless steel)
170 Litre 5⁰C to 60⁰C (Chamber Stainless steel)
280 lt 5⁰C to 60⁰C (Chamber Stainless steel)
340 Litre 5⁰C to 60⁰C (Chamber Stainless steel)


1.Outer body made of stainless steel 304 quality sheet with GMP
standard also available.
2.Suitable voltage stabilizer is to be used to protect the equipment
from voltage fluctuation.
3. Non use of stabilizer will render the warranty of the equipment
invalid.
4. Stabilizer rating:- 1K.V.A. for 85 and 170 Litre. 2K.V.A. for 280
and 340 Litre.

 

 

2 LAMINAR FLOW CABINET (Horizontal)
Offers a wide range of laminar air flow systems to suit the various
applications in laboratories of college, Hospital, Industrial,
Research and Scientific institutions. All products are designed &
manufactured with latest technology and best quality materials.
A unit to provide clean air, removes dust particles, double filtration
of air through, pre filters and HEPA filters. Basically the laminar
flow cabinet made of Wood and Plywood. All exterior surfaces are
covered with white laminated sheet, or properly painted. Interior
portions are finished with chlorinated rubber paint. Table top is
covered with melamine sheet or S.S mat finish sheet, sides of the
cabinet is panelled with polycarbonate transparent sheet. Equipped
with U.V. germicidal light, fluorescent light, provided cock for gas/
air, prefilter & HEPA filter, inclined pressure manometer.



Working area in cm Approx. external dimension
L X W X H in cm L X W X H in cm
60 x 60 x60 65 x 100 x 155
90 x 60 x 60 95 x 100 x 155
120 x 60 x 60 125 x 100 x 155
180 x 60 x 60 187 x 100 x 155

 

LAMINAR FLOW CABINET (Vertical)
Air flow from top to downstream through the inverted HEPA filter
placed on the top of the work space, working table is made with
satin finish stainless steel top. The inner cabinet is made with
marine plywood and outer covering is made with C.R sheet duly
powder coated, front door with transparent acrylic provided with
counter weight attachment for sliding operation and keep the door
at required level. Sides of the cabinet is panelled with poly carbonate
transparent sheet. Fitted with all standard accessories such as
U.V. germicidal light, fluorescent light, provided cock for as gas/
air, prefilter & HEPA filter, inclined pressure manometer.

 

Working area in cm Approx. external dimension
L X W X H in cm in cm
60 x 60 x 60 70 x 76 x 198
90 x 60 x 60 98 x 76 x 198
120 x 60 x 60 128 x 76 x 198
180 x 60 x 60 188 x 76 x 198


FUME EXHAUST HOOD
The fume exhaust hood is designed to use in the laboratory to
protect the personnel and equipment by throw out the toxic or
chemical vapour from the work area. The hood is fabricated out of
good quality water proof marine plywood or C.R. sheet, the outer
surface are covered with epoxy coated or FRP lining as required.
The working table is covered with granite slab or acid proof glazed
tiles, provided with stainless steel/FRP moulded/Ceramic sink
and water tap, provided with a cock for gas or air, additional power
point, diffused florescent tube. The exhaust system consists of a
dynamically balanced epoxy/FRP coated impeller coupled with
TEFC industrial motor three phase. The front glass shutter is
provided with counter weight arrangement for easy vertical sliding.

 

 

Working table Approx. external
size in cms dimension in cms
90 x 60 x 60 96 x 75 x 240
120 x 60 x 60 126 x 75 x 240
150 x 60 x 60 155 x 75 x 240
180 x 60 x 60 185 x 75 x 240

 

HOT PLATE (ROUND)
Aluminium / Cast iron hot plate, available with different dia and
different rating mounted on powder coated mild steel sheet
fabricated body, available with energy regulator and without energy
regulator. Maximum surface temp: 400⁰C.


 

Hot plate dia in cms Rating
20 1.5 KW
25 1.5 KW

Optional:- Thermostat 50⁰C to 300⁰C (imported) can be provided

 

RECTANGULAR HOT PLATE
Mild steel powder coated body, hot plate top is fabricated with
thick gauge stainless steel sheet. Temperature is controlled by an
energy regulator. Available in different sizes and different rating.
Maximum surface temp: 400⁰C.

 

Size of Hot Plate Ratings
25 x 30 cms 1.2 KW
25 x 40 cms 1.6 KW
30 x 45 cms 2.0 KW


Optional:- Thermostat 50⁰C to 300⁰C (imported) can be provided

 

HEATING MANTLES
Suitable for laboratories of chemicals, pharmaceuticals, dyes,
glass plants and distillation units etc., particularly useful for
heating inflammable liquids. Mantle is made from fibre glass yarn,
good quality nichrome / kanthal wire element. The fibre glass yarn
can withstand temp: up to 350⁰C, mounted in a powder coated
Aluminium / mild steel body with glass wool insulation.
Temperature is controlled by energy regulator. Suitable to work
on 220 V AC supply.

 

 

Capacity of flasks Watts
250ml 120
500ml 200
1 Litre 300
2 Litre 500
5 Litre 800
10 Litre 1000
20 Litre 1500
50 Litre 3600

 

HOT AIR OVEN (BOTTOM HEATED)
Outer body of M.S. sheet, powder coated, inner chamber choice
of Aluminium / stainless steel. Insulation: Glass wool 65mm.thick,
provided to reduce the heat loss to the economical minimum,
provided with adjustable and removable SS/aluminium shelves.
High quality imported heating elements and thermostat ensures
long life and accuracy respectively. Temp: controlled by: Imported
Hydraulic Thermostat/Digital Electronic Temp: controller. Models
available with air circulation fan. An AC TEFC long shaft motor is
coupled with centrifugal impeller type fan at the back side and provided
extra space for air circulation.


 

Temp: range ambient +5⁰C to 200⁰C, Accuracy: ±1⁰C at higher

Temp, supplied without thermometer, Various models are available

details are given below.

 

INCUBATOR (BOTTOM HEATED)

The perfect choice for reliable day to day operation in various uses

such as drying and staining of slides, paraffin embedding, tissue

culture work, incubation of anti-body tests and microbiological

determination etc.

 

Outer body made of M.S. sheet, powder coated and Inner chamber

choice of aluminium or stainless steel. Temp: Controlled by:

Imported Hydraulic Thermostat / Digital display proportionate temp:

controller, insulation: Glass wool 63mm reduces the heat loss.

Temp: range ambient +5⁰C to 110⁰C. Accuracy: ± 1⁰C. provided

with inner glass door. Supplied without thermometer.

Various models are available, details and specifications are given


 

Internal dimensions No. of Approx. Litre Watts
L W H in cm shelves capacity
30 x 30 x 30 2 28 300
35 x 35 x 35 2 45 300
45 x 45 x 45 2 95 300
45 x 45 x 60 3 125 300
60 x 60 x 60 3 225 400
60 x 45 x 91 3 250 400
60 x 60 x 91 3 325 400

12 SEROLOGICAL WATER BATH - THERMOSTATIC
Ideal for routine clinical procedure, incubation, inactivation, agglutination as well as most serological, pharmaceutical and biomedical procedure. Double walled construction outer body
made of M.S. sheet, powder coated, inner body made of 304 quality S.S. sheet. Glass wool insulation, fitted with 30⁰C to 110⁰C Imported Thermostat. Accuracy: ± 1⁰C. provided with (ISI quality) immersion type heating element, covered with perforated removable
diffuser tray, Two types of lids are available. Suitable to work on 220 V AC supply.

 

 

Bath size  L  W  H  in cm                           Watts      Capacity

        25 x 17.5 x 15                                    750           7 Litre.                          

        35 x 25 x 12.5                                   1000         11 Litre.

        30 x 25 x 17.5                                   1500         14 Litre.

33 x 30 x 17.5 (Suitable for 4 racks)            2000         18 Litre.

45.5 x 30 x 17.5 (Suitable for 6 racks)         2000          25 Litre.

60.5 x 30 x 17.5 (Suitable for 8 racks)         2000          33 Litre.

         45.5 x 35 x 27.5                               3000          45 Litre.

 

WATER BATH RECTANGULAR - THERMOSTATIC - (RING TYPE)

Ideal to evaporate the liquid like alcohol or for melting solids such

as to accommodate containers of various size removable type

concentric rings are provided on hole dia of 75mm.

Double walled construction, outer made of M.S. powder coated.

Inner body made of S.S. 304 quality sheet, glass wool insulation,

fitted with 30⁰C to 110⁰C imported thermostat. Suitable to work on 220 VAC supply.

 

 

Bath size L W H in cm                    Watts                No. of holes

         35 x 25 x 12.5                       1500                          6

         35 x 35 x 12.5                       1500                          9

         35.5 x 40.5 x 10                     2000                         12

          60 x 40.5 x 10                      2000                          24

 

14

Colony Counters

 

a)  Microprocessor colony counter 6 digit seven segment,

range 0-999999 with Averaging, Count Correction and 100

Sample Storage facility.

b)  Microprocessor colony counter 4 digit seven segment,

range 0-9999 with Averaging, Count Correction and 100

Sample Storage facility.

c)  Microprocessor colony counter 3 digit seven segment,

range 0-999 with Averaging, Count Correction and 100

Sample Storage facility.

d)  Digital colony counter 6 digit LED display, Range-999999

e)  Digital colony counter 4 digit LED display, Range 0-9999

f)  Digital colony counter 3 digit LED display, Range 0-999

 

15

Magnetic stirrer

 

a)  Micro magnetic stirrer 500ml capacity

b)  Magnetic stirrer 1 Litre capacity with Digital speed indicator

c)  Magnetic stirrer 1 Litre capacity with hot plate with Digital

     speed indicator

d)  Magnetic stirrer 2 Litre capacity with Digital speed indicator

e)  Magnetic stirrer 2 Litre capacity with hot plate with Digital

     speed indicator

f)  Magnetic stirrer 5 Litre capacity with Digital speed indicator

g)  Magnetic stirrer 5 Litre capacity with hot plate with Digital

     speed indicator

 

UV-Visual Spectrometer

 

a)  Double beam UV-VIS spectrophotometer with software

Microcontroller based instrument having range 190-1100nm,

On-screen standard curve display on large 5 inches graphic

LCD, 1.0nm spectral bandwidth, 1200 lines/mm grating,

8 position auto cell changer, Wavelength scanning, PC

connectivity through USB port & direct printer connectivity

using parallel port interface. It has facility for WL Scan,

Kinetics, multi wavelength & DNA/protein models,

inclusive of PC software.

b)  Double beam UV/VIS spectrophotometer microcontroller

based instrument having range 190 to 1100nm with 24x2 line

LCD display, two quartz cuvettes, 18 touch keys, base line

correction, source optimization & electronic calibration etc.

It has facility for measurement of % T, Abs.Conc.,K-Factor

and multi component analysis. A set of 2 Quartz & set of 4

glass cuvettes. The operating modes are single/multi

wavelength, wavelength scan, time scan etc. PC software

at extra cost @ Rs, 24000/-

c)  Single beam scanning UV-VIS spectrophotmeter

microcontroller based, range 190-1100nm with basic PC

software and 4 position cell changer. It has graphic LCD for

display of kinetic, concentration graphs. PC connectivity

through USB port & direct printer connectivity using parallel

port interface. Extensive elaborate keyboard for ease of

operator. Sample compartment can accommodate up to

100mm cuvettes (optional), Basic modes like %T, Abs,

concentration, kinetics available. Wavelength scanning and

DNA/proteins can be done using advanced professional PC

software (at extra cost @ Rs 12,000/-

d)  Single beam UV-VIS spectrophotometer microcontroller

based, range 200-1000nm with basic PC software and 4

position cell changer. PC connectivity through USB port &

direct printer connectivity using parallel port interface. Sample

compartment can accommodate up to 100mm cuvettes

(optional).basic modes like %T, Abs, concentration, kinetics,

available. Wavelength scanning can be done using advanced

professional PC software (at extra cost @ Rs.12,000/0)

e)  Microprocessor UV/VIS spectrophotometer (singel beam)

range 190 to 1000nm with facility for automatic concentration,

%T, Abs, and K factor measurements. It has 16x2 line LCD

data display and motorized wavelength selection on 4 digit

LED display. It has quard sample holder with 4 position

selector control for 10mm path length cuvettes. Facility has

been provided for 100 sample data storage and interface with

any printer. A set of 2 quartz cuvettes is provided.

RS 232C interface software can be provided on request at

extra cost @ Rs. 8000/-

f)  Digital UV-VIS spectrophotometer (single beam) range

190 to 1000nm with facility for automatic concentration,

& Transmission & Abs. measurements. Motorised

microcontroller based wavelength selection, 4 digit LED

display for wavelength, 3½ digit LED data display. It has 4

position sample holder with position selector control for 10mm

path length cuvettes. A set of 2 quartz cuvettes is provided.

 

17

Visible Spectrophotometers


 

a)  Microprocessor spectrophotometer (Vis) single beam with

range 340-960nm with facility for auto concentration, %

Transmission, absorbance and K Factor measurements. It has

16x2 line LCD for data & wavelength display. Its sample holder

accommodates glass cuvettes as well as glass test tubes of

10mm  path length. Facility has been provided for 90 sample

data storage and interface for any dot matrix centronics printer.

A set of 2 glass Cuvette is provided.

RS 232C PC software can be provided on request at additional

cost @ Rs. 8,000/-

b)  Digital spectrophotometer range 340-960nm with facility for

automatic concentration, % Transmission & Abs.

Measurements. 3½ digit data display. Simultaneous display of

wave length with 1nm resolution on 3 digit LED display and

data on a 3½ LED display are available. Provision made for

10mm path length, glass cuvettes.

c)  Digital spectrophotometer range 340-960nm with facility for

automatic concentration, % Transmission & Abs.

measurements. Wavelength resolution 5nm. 3½ digit LED

display with a set of 2 glass cuvettes of 10mm path length.

 

Centrifuge - table top Remi make

a)  Revolutionary general purpose laboratory centrifuge with

speed regulator, safety lid lock, digital speed meter & timer,

but without rotor heads and accessories

b)  Compact laboratory centrifuge with speed regulator, safety

lid lock, digital speed meter & timer, but without rotor heads

and accessories.

c)  8x15ml.swing out head with graduated glass tubes

d)  4x50ml.swing out head with graduated glass tubes

e)  8x15ml.angle head with polypropylene tubes

f)  4x50ml.angle head with polypropylene tubes

 

SINGLE WALL WATER BATHS

Stainless steel single walled rectangular construction, ideal for

evaporating the liquid like alcohol or for melting solids such as

agar, provided with concentric rings on hole dia of 75mm. I.S.I.

quality immersion type heater of kettle type provided with connector

and plug, without thermostat, suitable to work on 220 VAC.

Available in three different sizes.

Size of Bath in cm                       Watts        No. holes

      30 x 25 x 10                           1500               6

      30 x 30 x 10                           1500               9

      40 x 30 x 10                           2000              12

MUFFLE FURNACE

Sturdy construction with M.S. sheet, Light weight construction,

insulated with ceramic wool to reduce heat loss and weight.

Maximum temperature 1000⁰C. Working temperature 900⁰C.

Temperature controlled by Energy Regulator/ Digital temp:

controller, fitted with thermo-couple, pyrometer digital display.

Provided with thermal fuse on specific request. Suitable to work

on 230 V AC supply.

 

 

Internal dimension in cm                             Kilo watts

       10 x 10 x 22                                             1.5

       12 x 12 x 25                                             2.0

       15 x 15 x 22                                             2.5

       15 x 15 x 30                                             3.0

 

21

VORTEX MIXER (CYCLO MIXER)

This vortex mixer is vigorous agitating equipment used for thorough

mixing of precipitates in test tubes, small bottles  or flasks. The

motor  driven neoprene cup mounted eccentrically on the shaft

Vibrates rapidly. The mixing action is controlled by varying the

angle and pressure applied. Provided switch to select direct

working or on touch working. A speed regulator switch also

provided to control the speed. Suitable to work on 220 VAC.

15 watts.

 

 

 

 

 



Copyright © 2014 | All Rights Reserved | Bharath Scientific World